A.I.R.1 Parts List

U.S.A. Shoppers Parts List for the A.I.R.1 DIY Project:

• Clorox 1500 sqft air filter unit The main unit to house our project.
• UV-C E26 base 254nm bulb This specific wavelength is necessary.
• E26 Table Lamp Base (currently could only find this size as a 2-pack)
• Activated Carbon Filter Sheet, 16″ x 48″ x 0.2 We will cut specific sized pieces from this.

• Catalyst coated pads. You can either try making your own out of a special titanium dioxide coating sprayed onto one of these pads: Blank Filter Roll that could be used (ONLY IF PROPERLY COATED!!). OR, you could buy one of the larger size catalyst reactor pads replacement kits from one of the leading manufacturers of a PCO device that is highly recommended in some mold health related groups: Reactor pads (large square size only). We are not affiliated with this company but if you decide not to try and make your own catalyst pads, they are the easiest and possibly most effective option. Plus they will probably benefit from people purchasing replacement kits that normally would not have purchased anything from them due to income limitations, so perhaps it will be a win / win for everyone.

• 3D printed A.I.R.1 Atmospheric Indoor Revitalizer 3D print files , we need to have 1 top piece, 1 bottom piece, and 5 of the filter posts. These are all included if you purchase the files through the link just mentioned. They should be printed in White colored PETG filament and will require a typical consumer 3D printer capable of printing items as wide as 300mm. We are going try to and work with a trusted entity in the U.S. to offer to make and sell these parts for people who may not be able to find access to a 3D printer. (The parts file for purchase allows for personal noncommercial use). My preferred filament is Elegoo White PETG but choose depending on your printers requirements.
• Loctite Instant Mix Expoxy  This is needed to strongly secure the 3D printed parts together during the assembly process.
• Painters tape or masking tape Needed for hassle free and successful application of the epoxy
• Thin but long velcro strips to secure the filter assembly.
• ALTERNATE OPTION TO THE VELCRO: Low profile zip ties, at least 11″ , but velcro works better.- We will be combining them together as a simple low profile way to secure the final filter assembly if you can’t get the velcro for some reason.

* As Amazon associates we may earn a small commission from qualifying purchases.

UK Parts List Potential Options:

These are item I tried to find online from the U.S. that should work from the information I could see but I can’t offer any guarantees and I receive zero commissions or compensation for any of these links.

• Clorox 1500 sqft HEPA unit
• 3D printed A.I.R.1 Atmospheric Indoor Revitalizer 3D print files , we need to have 1 top piece, 1 bottom piece, and 5 of the filter posts. These are all included if you purchase the files through the link just mentioned. They should be printed in White colored PETG filament and will require a typical consumer 3D printer capable of printing items as wide as 300mm.  (The parts file for purchase allows for personal noncommercial use).

• Activated Carbon Filter Sheet, 16″ x 48″ x 0.2

• Loctite Instant Mix Expoxy

• low profile zip ties OR you could experimentally try using velcro strips below instead.

• longer Velcro strips
• 254nm UV bulb to fit in the lamp base
• Lamp Base – The only listing I could find on short notice was an ebay listing that ships worldwide, see image below for base size requirements. (specific sizing requirements is important here, see image below with specifications.)
• Reactor pads (large square size only). We are not affiliated with this company but if you decide not to try and make your own catalyst pads, they are the easiest and possibly most effective option. Plus they will probably benefit from people purchasing replacement kits that normally would not have purchased anything from them due to income limitations, so perhaps it will be a win / win for everyone.

* Please verify that the base you choose matched the dimensions in this image almost exactly for the unit to seal properly and sit correctly. As usual this is all offered for informational purposes only and we are not affiliated with any of these particular products and offer no warranties or guarantees, etc.